2020 Top 5 Cheap OBD2 Code Readers for DIY Users

Comparison table among Vident Ieasy310, Autel MaxiLink ML629, BluetoothDriver, Ancel AD310, Autel ML529. All of these devices are cheap OBD2 code readers for DIY users.

 

Content Autel MaxiLink ML629  BluetoothDriver Vident Ieasy310 code reader Ancel AD310  Autel ML529
Image Autel Maxilink Ml619 Bluetoothdriver Vident Ieasy310 Ancel Ad310 Autel Ml529
Pros
The device allows you to get extended information on the DTC (DIAGNOSTIC TROUBLE CODES) LIST, where you can study in detail the information regarding errors in electronic control units. And here it provides the function of resetting SRS- codes.
An advanced OBD2 Scanner that is able to turn your smartphone or tablet into a professional mechanic onboard. Supports CAN and all current OBD2 protocols. The scanner has the broadest functionality, while its management is more than clear and simple, thanks to a large and informative display. And the Read / Erase DTC and I / M readiness hot keys allow you to use it directly from the package
The connection cable boasts a very thick flexible insulator, so it is almost impossible to damage it. And it also has an increased length of 2.5 feet which facilitates its use in cars where the port is located in a hard-to-reach place.
Thanks to the built-in features, you will be able to receive not only a graphic display of diagnostic data, but also sound alerts about vehicle performance. Very handy when trying to do more than one thing at a time.
Cons Loads a little slowly. Doesn’t support Windows OS, but for owners of Android and iOS devices, it will surely be a godsend. USB cable is a bit short. Doesn’t erase all error codes. Difficutties may arise during initial setup.
OUR VERDICT The main advantage of this model is that it is compatible with almost all cars of 1996 release and later, supporting the OBDII scan function. It is also one of the few scanners that allows you to get VIN, CALID and CVN codes. A reasonably-priced scanning tool with smart programming capabilities of expensive models. Its Bluetooth capabilities give it an advantage over other models that lack this same feature. The Vident Ieasy310 autoscanner is a practical device, equipped with a large color display, a body with a rubber bumper, a user-friendly & comfortable keyboard and a fast processor. Supports about 28 cars equipped with the OBD2 connector, supplemented by a muttilingual interface and lifetime free software updates. The intuitive interface and controls consisting of only 4 buttons are the main advantages of the ANCEL scanner: even if you have not previously had experience with detailed devices, you can master the basic functions as soon as possible. The Autel OBD2 Scanner is a universal diagnostic tool for Asian and European vehicles, 1996 and newer, which performs many functions, such as reading and displaying indicators in real time, identifying problems and providing a detailed description of them.
DIAGNOSTIC
FEATURE
Engine Diagnosis, Transmission diagnosis, ABS/SRS diagnoses, DTC (Diagnostics Trouble Codes) lookup, Retrieving vehicle information (VIN, CALID and CVN) Repair Reports, Freeze Frame, Smog Check, Live Data, Free Software Update, Mode 6 Engine Diagnosis, emissions readiness status, on-screen DTC definitions, built-in DTC look up library, Lifetime free software updates Reading Powertrain Codes, Erasing CheckEngine code, viewing freeze frame data The Autel OBD2 Scanner is a universal diagnostic tool for Asian and European vehicles, 1996 and newer, which performs many functions, such as reading and displaying indicators in real time, identifying problems and providing a detailed description of them.
CONNECTION
OPTION
OBD2 port, USB, microSD- card slot OBD2 port, Bluetooth, iOS and Android devices OBD2 port, USB port OBD2 port OBD2 port, USB port
CONTROLS LCD-display with control panel The BlueDriver App (compatible with iOS and Android 2.8” color screen LCD display with control panel TFT color display, buift-in speaker
Data display Misfire monitor, fuel system monitor, Component Monitor, EGR System Monitor, 02 Sensors Monitor, Catalyst Monitor, Evaporative System Monitor, 02 Sensor Heater Monitor, Secondary Air Monitor, Heated Catalyst Monitor etc. Confirmed CEL codes,Pending CEL codes,Permanent CEL codes,Enhanced codes – ABS, Airbag, Transmission, etc (GM, Ford, Chrysler, Toyota), Possible Causes, Code Definitions Misfire Monitor, Fuel System Monitor,Comprehensive Components Monitor, Catalyst Monitor, Heated Catalyst Monitor, Evaporative System Monitor, Secondary Air System Monitor, Air Conditioning Refrigerant Monitor, Oxygen Sensor Monitor, Oxygen Sensor Heater Monitor, Exhaust Gas Recirculation System Monitor EGR System Monitor, 02 Sensors Monitor, 02 Sensor Heater Monitor,Catalyst Monitor, Evaporative System Monitor, Secondary air Monitor, Heated Catalyst Monitor, A/C system monitor 02 Sensor Test, l/M Readiness, EVAP Test, On Board Diagnostic Monitor  ID, etc
WARRANTY 1 year 1 year 1 year 1 year 1 year limited 1 year

 

What Features to Compare

Diagnostic Features

The first thing to consider when searching through a plethora of OBD2 scanners available is its diagnostic features. This is prime information that is gonna tell you whether (or not) a certain device will go with your car make. The cars manufactured before 1996 will not be compatible with any of the scanners on the market for the reason they’re not equipped with an OBD2 port, so, be aware. All scanners provide some built-in programming diagnostic software or a CD so a user doesn’t need to buy any special hardware. Diagnostic features vary a lot depending on the model of a device and a manufacturer (though, the plan is to extend functionality for more vehicles). However, there are certain things that are common for all – most OBD2 scanners are capable of updating their software and extending functional with micro-programs via the Internet and PC. These programs are usually easily found on the official websites of manufacturers and available for free download.

 

Connection Options

In order to update the software or stream data on a display, a scanner should be connected to the storage source via USB, Bluetooth or Wi-Fi. This is where you may want to consider available connection options of a chosen model and make sure that it will work for you as expected. Portable scanners are usually charged either via a battery or onboard power. Which one to choose will depend on what features you’d like your scanner provide. For example, if a scanner supports printouts, it may be a good idea to buy a battery-operated scanner. When compared to an onboard analog, it will provide an owner with more mobility options so that he can disconnect it and print out all the needed information on a car in any copy center.

 

Data to Display

The information on a car can be streamed right on a display of a scanner, smartphone or PC, depending on what option is supported by a device. Consider data to display feature and check what kind of information is gonna be displayed on your device – a short error code or a code with a definition.

 

Are cheap obd2 scanners any good?

Even the cheapest OBD2 scanners are good for basic diagnostics; some models output live data that is useful for running tests. The best OBD2 scanners support SRS/ABS trouble codes for diagnosing air bag systems and anti-lock brakes. Expect to pay $75 or more for these advanced models. An OBD2 scanner isn’t magic.

 

Can an obd2 Scanner reset codes?

Surprisingly enough, an OBD2 scanner is quite a nifty tool. The OBD2 scanner can be used to troubleshoot automotive service codes, as well as to clear the codes. There are several reasons why you’d want to clear a system code from a vehicle. The first of these is to make the check engine light turn off.

 

https://www.amazon.com/VIDENT-iEasy310-Enhanced-Scanner-Professional/dp/B081DV8786

Author: admin